Gold and precious metals

XRF spectrometer for gold and precious metals

You place the instrument on the signet ring, the small bar or the watch case. A few seconds later, the screen shows the alloy: gold, silver, copper, platinum, palladium. The piece is neither scratched, nor filed, nor touched with acid.

Measurement sheet Example
Au Gold
75.0 %
Ag Silver
12.5 %
Cu Copper
12.5 %

750 thousandths · 18 carat

Typical composition of an 18-carat yellow gold, given as an example.
Price
Handheld from CHF 12,000
Options
Purchase, leasing, rental, pre-owned
Trial
On your own pieces
Service
Calibration and repair in Switzerland

Yspekh · sales, calibration and after-sales service for XRF analysers in Switzerland · 30 years of expertise

How much a spectrometer for gold costs

The price generally includes the instrument, its initial calibration and training. It varies with the elements to be read and the options: assaying yellow gold at the counter and measuring a rhodium plating in the workshop do not call for the same configuration.

Handheld

CHF 12,000 – 45,000

At the counter or in the workshop, instrument in hand.

Benchtop

CHF 20,000 – 70,000

The piece placed in the measurement chamber.

What the instrument displays

It gives the content of each element as a percentage. For gold, this content gives the fineness, in thousandths or in carats.

  • 9 ct : 375
  • 14 ct : 585
  • 18 ct : 750
  • 22 ct : 916
  • 24 ct : 999
Fineness in thousandths · usual correspondence with carats

The same measurement reads silver, platinum, palladium and the alloying metals, on the finished piece.

79 Au Gold 196.97

When the measurement can be relied on

X-ray fluorescence reads the first few microns of the piece. On a homogeneous alloy, that is enough, provided the instrument is calibrated for precious alloys: a calibration intended for steel is not suitable. We calibrate the instrument for your pieces.

Three cases call for more care.

Plated piece

A thick layer of gold can read like solid gold. Thickness measurement removes the doubt; if the stakes justify it, fire assay settles the matter.

Lacquered or dirty surface

A lacquer, a polish or dirt distorts the result. The surface is prepared before measuring.

Small piece, curved shape

Signet ring, curb bracelet, inside corner: positioning takes care.

Gilding, rhodium plating, vacuum coatings

X-ray fluorescence also measures the thickness of layers, from aluminium to tin: gilding, rhodium plating, nickel undercoat. It reads on the finished piece, without a metallographic section, down to the vacuum coatings (PVD) of cases and bracelets, which are counted in tenths of a micron.

Downstream, it assesses the gold and precious metals carried away in cutting and polishing oils, in other words what leaves with the effluents.

Buy, rent or try first

Purchase

For measuring every day. The instrument is yours, calibrated for your pieces, and we train the person who will use it.

Leasing

You have the instrument straight away, and the cost is spread over time.

Rental

For an occasional need, without investing in an instrument.

We sometimes have pre-owned or demonstration instruments: ask us what is available.

Frequently asked questions

XRF or fire assay?

Fire assay melts a test portion and measures its entire mass. It is the reference method, but it consumes the sample, requires a laboratory and is paid for at every analysis. X-ray fluorescence measures in a few seconds without damaging anything, but only at the surface. On a homogeneous alloy the two agree, and the SN EN ISO 23345 standard governs this use. On a plated piece, fire assay settles the matter.

Is training needed?

We train your operators in using the instrument at commissioning.

Who services the instrument?

We do, from the canton of Vaud: maintenance, repair and calibration, with travel throughout Switzerland.

Can silver or platinum be measured?

Yes. The instrument reads gold, silver, platinum, palladium and their alloys. Each family of alloys has its own calibration.

Have your pieces measured

Tell us what you want to check: type of pieces, quantity, use. We will reply as soon as possible, with a proposal for a demonstration or a quote.

  1. You write to us Type of pieces, quantity, use.
  2. We measure your pieces And show you the right instrument.
  3. You receive a quote Purchase, leasing or rental.

Prefer to call? +41 78 901 17 80

Optional

Your details are used only to answer your enquiry.