Lead paint survey

Lead paint survey in Switzerland

Yspekh carries out lead paint surveys in Switzerland. Measurements are taken on site, by X-ray fluorescence, without sampling and through overpainted layers: before a renovation, a demolition or a sale, you know which surfaces contain lead.

The survey follows Swiss requirements (ASCA-VABS). It is carried out by Marc Dupayrat, trainer for the course "Lead paint surveying in buildings".

4
Instrument families
20
Application domains
100%
Maintenance carried out in Switzerland
Perche d'extension appareil Heuresis Pb200i.jpg
The measurement

On the wall, without sampling

The analyser is held against the surface. It reads lead through the successive layers of paint, where a surface test only sees the last one. The result is expressed in mg/cm², point by point, and every reading is located and recorded.

Calibration is checked at the start and at the end of the campaign against a certified standard.

The lead analyser in detail
Prélèvements surfaciques sur peinture. Surface contrôlée.
When to ask for it

Before works, before a sale, or after an elevated blood lead level

Before starting a renovation or demolition site, you need to know what the dust will contain, and what will have to be contained. Before a sale, the measurement campaign documents the condition of the property.

When a doctor has established an elevated blood lead level, the source of the lead still has to be found: old paint, dust, pipes, objects.

The on-site XRF analysis service
  • Calibrated in Switzerland
  • Repaired in Switzerland
  • Custom adjustments
  • Local support
Blue-green gradient graphic with glass effect

Let's discuss your needs

Our experts answer your questions and arrange a demo on your samples.